Stirrer Accessories
Chemglass Life Sciences Coils, Reactor Capacity: 10L, Flange ID: 200mm, Tubing Diameter: 1/4"
Reactor Capacity: 10L, Flange ID: 200mm, Tubing Diameter: 1/4". For use with unjacketed cylindrical reaction vessels with a 200mm ID or 300mm ID flange. Coil can be used to cool or heat the contents of a vessel. Fabricated from #304 Stainless Steel tubing with a green PFA coating that is electrically tested to insure complete coverage. This method of manufacture provides for excellent heat transfer and avoids the problems normally associated with heat-shrink PTFE tubing on copper tubing.
Chemglass Life Sciences Reactor Capacity: 50L, Flange ID: 300mm, Tubing Diameter: 1/2"
Reactor Capacity: 50L, Flange ID: 300mm, Tubing Diameter: 1/2". For use with unjacketed cylindrical reaction vessels with a 200mm ID or 300mm ID flange. Coil can be used to cool or heat the contents of a vessel. Fabricated from #304 S.S. tubing with a green PFA coating that is electrically tested to insure complete coverage. This method of manufacture provides for excellent heat transfer and avoids the problems normally associated with heat-shrink PTFE tubing on copper tubing.
Ace Glass, Inc. Bearing, Trubore, glass, 10mm, 35/20, 35/25
10mm Trubore glass bearing with 35/20, 35/25 spherical joint. Bearing is for use with aluminum packing box in low positive pressure and vacuum applications. Using the graphite-impregnated PTFE packing and ACE Stir-Lube, pressures down to 7 microns have been obtained at 170rpm, using only a mechanical pump. Speeds over 1000rpm are not advisable due to heat generated. Indefinite packing life. Frequent tightening of the packing box is unnecessary once the packing has run in. The high vacuum lubricant trap adapter prevents lubricant from running into stirred material. Use with precision ground, 10mm stirring shaft.
Bellco Glass, Inc. Stainless Steel Marine Impeller, 4OD-LH With 1/2"bore & set screw"
SST Marine Impeller Only. Material: SST 316L with EP finish. 4" OD Prop. Bore size: 1/2". With 1/4-20 sst set screw. Pitch: Left Hand. MADE IN THE USA
Bellco Glass, Inc. Low Profile Impeller Assembly ,3 L PTFE Paddle
Ptfe impeller for use with over head drive motor and drive adapter in 3l low profile bioreactor vessel. MADE IN THE USA Paddle size: 3 x 6 3/4"
Bellco Glass, Inc. Stainless Steel Marine Shaft Only, 8L With Clip
Material: 316l stainless steel with electropolish finishDimensions: 1/2"x 7 1/2"Size: 8lIncludes: e-clip for mounting marine prop (1964-73000). MADE IN THE USA
Bellco Glass, Inc. Low Profile Stainless Steel Impeller,3L
Stainless steel 3L low profile impeller assembly For low profile Over Head Drive vessel. MADE IN THE USA Material: SST 316L Electropolish finish, ra 32 or better Fully assembled Paddle dimensions: 2" T X 5 1/4" W
Bellco Glass, Inc. RH Pitch Blade Impeller 2in,3L
RH Pitch Blade ImpellerStainless Steel pitched blade impeller with right hand oriented blades.Assemble one or more impellers onto 3L 15L drive shaft for mammalian cell culture316L stainless steel construction. MADE IN THE USA
Bellco Glass, Inc. Low Profile Glass Impeller Assembly , 3L
Low Profile Glass Impeller Assembly . MADE IN THE USA Size: 3000ml (for low profile 3l vessel)Paddle: 3" tall x 7" wide